BuildGreenToday
AFM Safecoat Exterior Paint
Free Shipping On All Products!
Ship Same Day!
SAFECOAT ALL PURPOSE EXTERIOR SATIN
This sophisticated, premium quality, fast-curing paint is designed for exterior surfaces where a durable, weather resistant finish and superior film formation are needed. It is blister and fade resistant, has excellent hide, extremely low VOC for sustainability and pollution reduction and cleans up easily with soap and water.
Spec Sheet. Click here.
MSDS Sheet. Click here.
SAFECOAT® ALL PURPOSE EXTERIOR SATIN
USE ON:
Properly primed exterior walls, properly cured and
primed plaster (below 10 pH), masonry, woodwork and
metal.
LIMITATIONS:
Safecoat paints are made without formaldehyde
preservatives. Do not contaminate. Do not use when
indoor temperature is below 55 degrees F.
Do not freeze.
SURFACE PREPARATION:
Ideal painting conditions include: dry surface, fresh air
flow, 30-70% relative humidity, 55° to 85° F.
Clean surfaces of dirt, grease, mildew and oil.
Surface should be completely dry before application.
COVERAGE:
One gallon covers approximately 300-400 based on
surface porosity.
APPLICATION:
Stir well before use; then apply with brush, roller or
airless sprayer. Always wear painters mask when
spraying. Thick application, high humidity or conditions other than normal will cause Safecoat to
dry and cure more slowly.
Spraying Instructions:
n Reduce with up to 1/2 pint of water/gallon
as needed.
n Airless sprayers should use 17/1000 to 21/1000 tip
n Reversible tips are best
n Use only 30 mesh high pressure filters
n For best coverage, spray 18" from surface
n Overlap preceding coat with 1/4 to 1/2 the
fan wid